**ราคาพิเศษ โทรหาเรา 082-855-6449

หรือสอบถามที่ tpe_sound@yahoo.com  

LINE ID : @TPESOUND

Outstanding Performance

Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate
2 inputs, 6 outputs with full matrix mixing

Top-grade DSP Engine

11 band parametric equalization per input channel
7 band parametric equalization per output channel
Each band can be switched to Bell, Low/High Shelving with variable Q response
Crossover filters with slopes from 6dB/Octave up to 48dB/Octave including Butterworth, Bessel,

Linkwitz-Riley
Each output features a dynamic range controller composed of a Peak Limiter.
Adjustable Delay time up to 900 ms for every input channel, and up to 340 ms for every output channel
Phase correction per output channel

Direct PC/Network Connection

Rear panel USB connector for direct PC communications
RS485 connection for system setup, monitoring and control via fully manageable remote PC software

Control

Front panel interactive LCD display for local access and configuration
Front panel 7-LED level meter indicators per channel
Simultaneous control up to 32 units via PC software
Up to 48 storable user presets
Security Lockout

Audio

Analog Input

2 x XLR electronically balanced

Analog Output

6 x XLR electronically balanced

AD & DA Converters

24bit 96kHz

Minimun Load

150 ohm

THD+N

0.005% at 1kHz 0dBu
0.01% at 1kHz 16dBu

S/N

>106 dBA

Frequency Response

20Hz – 20kHz; ±0.5dB

DSP & Processing

DSP Engine

MARANI®  DSP

DSP Resolution

24×32 bit for filtering process
96 bits resolution on intermediate computation results

Parametric Equalization

11 filters per input selected as Bell or Shelving
7 filters per output selected as Bell or Shelving

Filter Type

Bell, Shelving

Filter Gain

From -12dB up to +12dB by 0.5dB resolution steps

Center Frequency

Selectable with a 1/24th of octave resolution step from 20Hz up to 20kHz

Filter Q/BW

Q from 0.4 up to 12 by 0.1 resolution steps

Crossover Section HPF/LPF

Butterworth 6/12/18/24 dB per octave
Bessel 12/24 dB per octave
Linkwitz-Riley 12/24/36/48 dB per octave

Internal Noise Generator

White/Pink Noise, level from -30dBu to 0dBu

Input Noise Gate

Threshold from -90 dBu up to -60 dBu

RMS Compressor

Threshold from -14 dBu up to +16dBu
Ratio: 2:1~100:1; Knee: 0%~100%
Attack time from 5ms up to 200ms 
Release time from 0.1 sec up to 3 sec 

Delay

900 ms for every input channel and 340 ms for every output channel

Ground Noise

-88 dBu

General

Device Presets

48 User Presets

Front Panel

2x24 character LCD display with green LED backlight
7-LED meter per input channel -20dBu to +15dBu, clip
7-LED meter per output channel -15dBu to +15dBu, clip or limiter mode
Blue LED (Edit) and Red LED (Mute) per channel
NAV/PM1 Rotary encoder push button switch
PM2, PM3, ENTER, ESC, UTILITY push button switches
EDIT/MUTE push button per channel
USB type B connector

Rear Panel

2 x XLR female connector (Input)
6 x XLR male connector (Output)
1 x XLR female connector for RS485 (Input)
1 x XLR male connector for RS485 (Output)
2 x Ground-lift toggle switch
IEC C13 16A connector; Power on/off switch

Main AC
90-240VAC (50/60Hz) – 40W

Dimensions

19”x 1.75”x 9” (483x44x229mm) 1RU

Package size
560x320x110(mm)

Weight, Net / Shipping
6.61 lbs (3.0 Kg) / 7.71 lb (3.5 Kg)