SOUNDBEST CROSSOVER 234XL 从
ReadyPlanet.com
dot dot
dot
dot
dot
dot
dot


  [Help]
dot
dot
dot
dot

dot
dot
dot
dot
醚邯用朽г狗咬腹页训酝凸渑轨 www.tpesound.com
dot
dot
www.tpesound.com
dot
dot
dot
dot
TAPCO 260FX www.tpesound.com
dot
dot
dot
dot
MODIFY, 饬丛恳
dot
dot
PROEURO TECH, 沦饷喾
dot
dot
AJ, A&J, AUDIO JOCKEY
dot
dot
ALTO, LTO
dot
bulletNPE


好陨逊 寡熬爨澎嵬勾爨渺窃 ㄓ⊙
yamaha, 乱烈舞, 垂得, 眯汉嗍章
Behringer, 嗪兔烀鸳啜兔
P.AUDIO, P Audio, 赐∨逾晶


SOUNDBEST CROSSOVER 234XL 从  
盟咽 : 107270
抡杷橥 : SOUNDBEST
秘韫 : 234XL 从
靡ひ弧翟 :  2,900.00      
靡屡朽驼麓妈 :
SOUNDBEST CROSSOVER 234XL 从
崧∴收搂饬夤嗣淄枢低迷馔 2 芬, 3 芬 崤 4 芬 撮锹千楣嗦砧铝 ぱ绰枰工且炼砧浯榉莽幻试犯岳揖 闼榫叛о收搂氛枋梁觅踌岷
靡屡朽驼麓费椐肆 :

 **靡ひ驹嗳 夥盟亦靡 082-855-6449

嗣淄释憾伊氛 tpe_sound@yahoo.com  

LINE ID : @TPESOUND

  • CROSSOVER
  •  
  • CROSSOVER

 

  • SPECIFICATIONS
  • connectors:1/4" TRS
  • Type:Electronically balanced/unbalanced, RF filtered
  • Impedance:Balanced > 50 kΩ, unbalanced > 25 kΩ
  • Max Input Level:+22 dBu typical. balanced or unbalnaced
  • CMRR:> 40 dB, typically > 55 dB at 1 kHz
  • OUTPUT
  • ConnectorsXLR
  • Type:Electronically balanced/unbalanced, RF filtered
  • Impedance:Balanced > 60 kΩ, unbalanced >30 kΩ
  • Max Output Level:> +20 dBu balanced/unbalanced into 600Ω or greater
  • PERFORMANCE
  • Bandwidth:20 Hz to 20 Khz, +0/-0.5 dB
  • Frequency Response:< 3 Hz to > 90 kHz, +0/-3 dB
  • Signal-to-Noise:Ref: +4 dBu, 22 kHz measurement bandwidth
  • STEREO MODE
  • Low Output:> 94 dB
  • Low-Mid Output:-
  • Mid Output:> 93 dB
  • High-Mid Output:-
  • High Output:> 90 dB
  • MONO MODE
  • Low Output:> 94 dB
  • Low-Mid Output:> 94 dB
  • Mid Output:-
  • High-Mid Output:> 92 dB
  • High Output:> 88 dB
  • Dynamic Range> 106 dB unweighted, any output
  • THD+Noise:< 0.004% at +4 dBu, 1 kHz
  •  < 0.004% at +20 dBu, 1 kHz
  • Interchannel Crosstalk:< -80 dB, 20 Hz to 20 kHz
  • CROSSOVER FREQUENCIES
  • Stereo Mode
  • Low/High:45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Low/Mid:45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Mid/High:450 Hz to 9.6 kHz
  • MONO MODE
  • Low/Low-Mid:45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Low-Mid/High-Mid:450 Hz to 9.6 kHz
  • High-Mid/High:450 Hz to 9.6 kHz
  • Filter Type:Linkwitz-Riley, 24 dB/octave, state-variable
  • FUNCTION SWITCHES
  • Front Panel
  • Low Cut:Activetes 40 Hz Butterworth, 12 dB/octave high-pass filter,
  •  one switch per channel
  • Phase InvertInverts the phase at the output, one switch per output.
  • Rear Panel
  • x10:Multiplies crossover frequency range by 10, one switch per channel.
  • Mode:Selects stereo/mono and 2/3/4-way operation
  • LF Sum:Selects normal (stereo) or mono-summed low frequency operation.
  • INDICATORS
  • Stereo Operation:Green LED
  • Mono Operation:Yellow LED
  • Low Cut:Red LED per channel
  • x10Green LED per channel
  • Phase InvertRed LED per output (3 per channel)
  • POWER SUPPLY
  • Operating Voltage:100 VAC 50/60 Hz, 120 VAC 60 Hz
  •  230 VAC 50/60 Hz
  • Power Consumption:15 Watts
  • Mains Conection:IEC 320 receptacle
  • PHYSICAL
  • Dimensions:1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
  • Weight3.7 lbs. (1.7 kg)
  • Shipping Weight:5.4 lbs. (2.5 kg)

ㄓ骨